Skip to content
Home Assistant TestFlight
Security & safety

Abode

abode

Built inCloud push

The Abode integration allows you to integrate your Abode Home Security systems into Home Assistant and use its alarm system and sensors to trigger automations.

In Apple Home through HomeKit Bridge

What HomeKit Bridge makes of each kind of entity this integration creates, read from its source code. A device only gets the ones that apply to it.

EntityShows up asNote
lightLight
switchSwitch or outlet
coverBlind, garage door, window or door
lockLockNeeds its own HomeKit Bridge in accessory mode
cameraCameraNeeds its own HomeKit Bridge in accessory mode
alarm_control_panelSecurity system
binary_sensorSensor (contact)
sensorSensor (humidity, light level, temperature)

2 reports below say how a device from this integration behaves in the Home app.

What people report

Abode security hardware works via cloud push; the IOTA gateway motion sensor never clears because Abode does not report it.

  • Works3
  • Partly works1
  • Requested1
  • Won’t be supported1
DeviceIn Home AssistantIn Apple HomeWhat they saidSource
Abode alarm systemWorks CloudRecommended as self-monitored security system integrated into Home Assistant
Saved copy
Ubiquiti for network gear Dahua Starlight IP cams Abode for self-monitored dedicated security system that can be integrated into HomeAssistant I run HomeAssistant in a docker on my QNAP NAS without issue. I also run couple of other dockerized services to connect with other hardware. I've had no issues so far. I also use QNAP's Surveillance Station for 24/7 recording of 4 DAHUA IP cams. IVS (smart tripwire/zone intrusion) events connect to HomeAssistant via MQTT for notifications and automations. Rock solid so far.

Excerpt saved from the Arctic Shift Reddit archive on 2026-10-23.

Reddit comment · 2017-09
Abode security system (Gen 1)WorksWorks well for geofence arming and door sensor automations; HA bridges Gen 1 to HomeKit
Saved copy
Surprisingly, my Abode security system has worked exceptionally well with Home Assistant. My two primary use cases are geo-location based auto-enablement and a few door sensor/light automations. Since I have a Gen 1 Abode system which does not include HomeKit support, Home Assistant provides the bridge so all of my Abode devices (primarily door/window sensors) are accessible via HomeKit as well. There are definitely cheaper ways to accomplish what I have, but for someone who is already deep into the Abode ecosystem, this works well.

Excerpt saved from the Arctic Shift Reddit archive on 2026-10-23.

Reddit comment · 2021-08
Abode water valveWorks CloudWater valve support added
Saved copy
Description: Add support for water valves in Abode. Unfortunately, I don't have a water valve to test so I'll need someone else to test this. ## Checklist: - [ ] The code change is tested and works locally. - [x] Local tests pass with `tox`. Your PR cannot be merged unless tests pass - [x] There is no commented out code in this PR. - [x] I have followed the [development checklist][dev-checklist]

Excerpt saved from GitHub on 2026-10-23.

PR #30635 · 2020-01
Philips Hue RGB bulb via AbodePartly worksPartly in Home
Colour wheel fails on iPhone, works on Apple Watch and Siri
Works in HA; iOS Home app colour wheel fails
Saved copy
… (Hass.io/Docker/Windows/etc.): Hass.io 2.12 on a VM running on Windows 10 Component/platform: https://www.home-assistant.io/components/homekit/ Connection path: Philips Hue RGB Light >Abode > Abode component > HA > Homekit Working points: Abode OK. Home Assistant lovelace OK. Behavior with Homekit: Watch OS 5.1.2: Home app OK Siri OK iOS 12.3.2: Home app FAIL Siri OK iOS Home App: When selecting any new color via color wheel or a precise one the color changes for a moment but rolls back immediately to a white ambiance one, different that the one previous the request. This only happens on iOS …

Excerpt saved from GitHub on 2026-10-23.

Issue #24513 · 2019-06
AbodeRequestedHomeKit discovery requested; maintainer says still worth doing
Saved copy
… done based by specifying homekit in your manifest and adding a config flow step `async_step_homekit`. Once discovered, we can prompt users to log in to Abode via user/pass. Abode has been found in our gathered Homekit models.

Excerpt saved from GitHub on 2026-10-23.

Issue #32744 · 2020-03
Abode IOTA gateway motion sensorWon’t be supported CloudWorks in Home
Motion status does update through Abode's own HomeKit
Always shows motion detected; Abode backend does not report state
Saved copy
… with the issue: 0.103.0 Last working Home Assistant release (if known): Unknown Operating environment (Hass.io/Docker/Windows/etc.): Hass.io Integration: Abode Integration https://www.home-assistant.io/integrations/abode/ Description of problem: The Motion sensor associated with the IOTA gateway device never transitions from "motion detected" to clear. It is not clear whether the Abode system itself is not reporting the state correctly, or if there is a problem internally to HA. All other motion sensors show up in HA as "occupancy" (not "motion"). Those all appear to work correctly. …

Excerpt saved from GitHub on 2026-10-23.

Issue #29896 · 2019-12

Gathered from GitHub issues, pull requests, discussions and docs, and from r/homeassistant. These are individual reports, so check the linked thread and the date before you buy.

How it connects

Cloud push

Goes through the maker’s cloud, which sends updates as they happen. Needs the internet and an account.

Found automatically over

  • HomeKit pairing

Devices that also speak HomeKit

  • Abode
  • Iota

These can pair with Apple Home directly, without Home Assistant.

Details

Installs (analytics)963 (0.14%)
Added inHome Assistant 0.52
Set up in the UIYes
Maintainers@shred86

In ReReHome

Whatever HomeKit Bridge shares reaches Apple Home as normal HomeKit accessories behind your Home Assistant bridge, so ReReHome shows and controls them like any other.

Bridges get their own settings page listing the accessories behind them.