Security & safety

EVSE Load Balancer

dirkgroenen/hass-evse-load-balancer · vv1.0.10

HACSLocal push

Load Balancing for EV Chargers using existing sensors - no vendor lock-in, no extra devices.

In Apple Home through HomeKit Bridge

What HomeKit Bridge makes of each kind of entity this integration creates, read from its source code. A device only gets the ones that apply to it.

Entity	Shows up as	Note
`sensor`	Sensor (temperature, humidity, air quality…)

What people report

Works with Easee, Zaptec, Amina S, Lektrico and Keba chargers plus DSMR, HomeWizard and Tibber meters; OCPP and Tuya Local devices are still pending.

Works10
Requested3

Device	In Home Assistant	What they said	Source
Amina S charger	Works	Listed as supported in the README Saved copy Supported devices: Integration; DSMR-compatible meters; HomeWizard meters; AmsLeser.no; Tibber Pulse; Custom configurations; Easee Chargers; Zaptec Chargers; Amina S Chargers; Lektrico Chargers; Keba Charging Station (BMW Wallbox). Excerpt saved from the README on 2026-10-23.	README
Amina S charger via ZHA	Works Local	Load balancing over Zigbee via ZHA added Saved copy What Adds support for load-balancing an Amina S charger connected through ZHA (using the attaxia/amina_s_zha_quirk). Previously only the Zigbee2MQTT variant was supported, so a ZHA-connected Amina S never appeared in the config flow and was never matched by the charger factory. ## Why it didn't work before The existing `AminaCharger` is an MQTT implementation: - `is_charger_device()` required the `mqtt` identifier domain + a `zigbee2mqtt` prefix. - The config-flow device filter only offered `{integration: "mqtt", manufacturer: "Amina Distribution AS"}`. A ZHA device has identifier domain … Excerpt saved from GitHub on 2026-10-23.	PR #91 · 2026-06
AmsLeser.no meter	Works	Listed as supported in the README Saved copy Supported devices: Integration; DSMR-compatible meters; HomeWizard meters; AmsLeser.no; Tibber Pulse; Custom configurations; Easee Chargers; Zaptec Chargers; Amina S Chargers; Lektrico Chargers; Keba Charging Station (BMW Wallbox). Excerpt saved from the README on 2026-10-23.	README
DSMR-compatible meters	Works	Listed as supported in the README Saved copy Supported devices: Integration; DSMR-compatible meters; HomeWizard meters; AmsLeser.no; Tibber Pulse; Custom configurations; Easee Chargers; Zaptec Chargers; Amina S Chargers; Lektrico Chargers; Keba Charging Station (BMW Wallbox). Excerpt saved from the README on 2026-10-23.	README
Easee charger	Works	Listed as supported in the README Saved copy Supported devices: Integration; DSMR-compatible meters; HomeWizard meters; AmsLeser.no; Tibber Pulse; Custom configurations; Easee Chargers; Zaptec Chargers; Amina S Chargers; Lektrico Chargers; Keba Charging Station (BMW Wallbox). Excerpt saved from the README on 2026-10-23.	README
HomeWizard meters	Works	Listed as supported in the README Saved copy Supported devices: Integration; DSMR-compatible meters; HomeWizard meters; AmsLeser.no; Tibber Pulse; Custom configurations; Easee Chargers; Zaptec Chargers; Amina S Chargers; Lektrico Chargers; Keba Charging Station (BMW Wallbox). Excerpt saved from the README on 2026-10-23.	README
Keba charging station (BMW Wallbox)	Works	Listed as supported in the README Saved copy … DSMR-compatible meters; HomeWizard meters; AmsLeser.no; Tibber Pulse; Custom configurations; Easee Chargers; Zaptec Chargers; Amina S Chargers; Lektrico Chargers; Keba Charging Station (BMW Wallbox). Excerpt saved from the README on 2026-10-23.	README
Lektrico charger	Works	Listed as supported in the README Saved copy Supported devices: Integration; DSMR-compatible meters; HomeWizard meters; AmsLeser.no; Tibber Pulse; Custom configurations; Easee Chargers; Zaptec Chargers; Amina S Chargers; Lektrico Chargers; Keba Charging Station (BMW Wallbox). Excerpt saved from the README on 2026-10-23.	README
Tibber Pulse	Works	Listed as supported in the README Saved copy Supported devices: Integration; DSMR-compatible meters; HomeWizard meters; AmsLeser.no; Tibber Pulse; Custom configurations; Easee Chargers; Zaptec Chargers; Amina S Chargers; Lektrico Chargers; Keba Charging Station (BMW Wallbox). Excerpt saved from the README on 2026-10-23.	README
Zaptec charger	Works	Listed as supported in the README Saved copy Supported devices: Integration; DSMR-compatible meters; HomeWizard meters; AmsLeser.no; Tibber Pulse; Custom configurations; Easee Chargers; Zaptec Chargers; Amina S Chargers; Lektrico Chargers; Keba Charging Station (BMW Wallbox). Excerpt saved from the README on 2026-10-23.	README
AMS HAN meter (current sensors)	Requested	Setup only accepts watt sensors, not amp current sensors Saved copy When configuring I'm only allowed to add sensors providing measurements in W, not amps. I have sensors from AMS HAN meter providing both voltage, current and power, but the sensors providing current is not avilable in the drop-down menus during setup. Excerpt saved from GitHub on 2026-10-23.	Issue #75 · 2025-11
Feyree 22kW 3-phase charger and VERATTI meters (Tuya Local)	Requested	Pending PR adds adapters for Tuya Local devices Saved copy Feyree chargers and VERATTI meters exposed by Tuya Local do not appear in the device selectors and have no adapters. This adds support for the tested `feyree_ev_portable_charger` (Feyree `22kW 3phase`) and `veratti_3phase_breaker` (VERATTI `V4 3-phase circuit breaker`) profiles. ### Changes - Match the specific Tuya Local profiles and resolve enabled entities by device registry membership and unique-ID suffix, so renamed entity IDs work. - Read the meter's three phase currents directly, accept A/mA, round up, and reject missing, disabled, unavailable, negative, nonnumeric, or nonfinite … Excerpt saved from GitHub on 2026-10-23.	PR #98 · 2026-10
OCPP chargers	Requested	Support branch open for testing Saved copy Closes #44 by adding support for OCPP chargers. As the requester of the charger @kljakobsen, please can you have a look at this branch and test it out locally? Apart from hoping that the correct entities will be used, I'm also particularly interested to know whether there's a way for me to retrieve the charger's configured maximum limit? Can you browse around and see if there's anything that does _not_ expose the current configured _current_, but instead the maximum current of the installation? Right now I've just used a value of 32A as a max - but obviously it would be way more ideal to … Excerpt saved from GitHub on 2026-10-23.	PR #47 · 2025-07

Gathered from GitHub issues, pull requests, discussions and docs, and from r/homeassistant. These are individual reports, so check the linked thread and the date before you buy.

How it connects

Local push

Talks to the device on your network, and the device tells Home Assistant the moment something changes.

Details

Installs (analytics)	33
GitHub stars	52
Latest version	v1.0.10 (2026-10-20)
Set up in the UI	Yes
Maintainers	@dirkgroenen
License	MIT

Devices listed in its README

Integration
DSMR-compatible meters
HomeWizard meters
AmsLeser.no
Tibber Pulse
Custom configurations
Easee Chargers
Zaptec Chargers
Amina S Chargers
Lektrico Chargers
Keba Charging Station (BMW Wallbox)

In ReReHome

Whatever HomeKit Bridge shares reaches Apple Home as normal HomeKit accessories behind your Home Assistant bridge, so ReReHome shows and controls them like any other.

Bridges get their own settings page listing the accessories behind them.

Sources

Documentation: https://github.com/dirkgroenen/hass-evse-load-balancer
Source code: https://github.com/dirkgroenen/hass-evse-load-balancer
Issues: https://github.com/dirkgroenen/hass-evse-load-balancer/issues
HACS: https://hacs.xyz