Lighting

Magic Home

flux_led

Built inLocal push

The Magic Home integration supports several brands of switches, bulbs, and controllers that use the same protocol. Chances are high that your bulb or controller (eg. WiFi LED CONTROLLER) will work with this integration if you can control the device with the Magic Home app or the Surp Life app.

Documentation Source code

In Apple Home through HomeKit Bridge

What HomeKit Bridge makes of each kind of entity this integration creates, read from its source code. A device only gets the ones that apply to it.

Entity	Shows up as	Note
`light`	Light
`switch`	Switch or outlet
`button`	Button (as a switch)
`select`	Mode picker (as switches)

1 report below say how a device from this integration behaves in the Home app.

What people report

Magic Home and similar LED controllers work locally with broad model-code support. Some unusual models and newer firmware fail, and the maintainer has since moved to ESPHome.

Works2
Partly works2
Not working1

Device	In Home Assistant	In Apple Home	What they said	Source
Magic Home controllers	Works Local		Docs list many model codes such as 0x33, 0x35, 0x44, 0xA1 to 0xA7 Saved copy Supported devices: 0x01; 0x03; 0x04; 0x06; 0x07; 0x08; 0x09; 0x0E; 0x10; 0x16; 0x17; 0x1A; 0x1C; 0x1E; 0x21; 0x25; 0x33; 0x35; 0x41; 0x44; 0x52; 0x54; 0x62; 0x93; 0x97; 0xA1; 0xA2; 0xA3; 0xA4; 0xA6; 0xA7; 0xE1; 0xE2; 0x02. Excerpt saved from home-assistant.io on 2026-10-23.	Docs
Magic Home sockets AK001-ZJ21410	Works Local		Newer socket revision with remote sensor supported Saved copy Proposed change Hardware: AK001-ZJ21410 has a remote sensor. The rest of the remote configuration already works with no changes. No docs changes since this is just a newer revision of an existing device with 2.4ghz remote support. Some of the newer devices already have hardware support for it but shipped with older firmware and can be upgraded from firmware 3.12 to 3.22. ## Type of change <!-- What type of change does yo Excerpt saved from GitHub on 2026-10-23.	PR #79074 · 2022-09
Flux LED / Magic Light bulb	Partly works	Partly in Home Brightness bounces between random levels after releasing slider in Home app	On/off and colour work but state updates are slow Saved copy … environment (Hass.io/Docker/Windows/etc.): Ubuntu 14.04 / Python 3.5 Component/platform: Homekit Description of problem: When setting the brightness of a light through the Home app, the lights will bounce between random light levels within a one second interval once your finger is removed from the light level control in the apple home app. No issues when used through Homebridge, or setting light level through the Homeassistant GUI. Problem-relevant `configuration.yaml` entries and (fill out even if it seems unimportant): [code] Traceback (if applicable): [code] Additional information: Excerpt saved from GitHub on 2026-10-23.	Issue #13493 · 2018-03
Magic Home CCT ceiling light 0x09	Partly works Local		Could not switch on/off or dim; support was a guess, mask fix suggested Saved copy The problem I bought a CCT bulb and this is my first time to config a Magic House device in HA. I followed the tips to connect it to my router and HA discovered it autometically. It works fine with the Magic Home App, but I failed to change the power status or brightness in HA. When I click the switch button on the dashboard it slides to the other side, with nothing happen to the bulb, holding on for a while and slides back again. This corresponds to the log. However, when I turn it on/off in Magic Home App, the on/off status changes exactly on the HA dashboard(but cannot see the change of … Excerpt saved from GitHub on 2026-10-23.	Issue #75832 · 2022-07
Surplife LED controller	Not working		Stopped responding to colour and brightness after firmware update Saved copy The problem I recently received a led controller. It worked ok for a few hours, and now became completely unresponsive to any commands except on/off and sometimes some of the effects. Color change doesn't work anymore, so is brightness. The firmware update on the controller seem to have added a lot of new features... That this integration also were sadly missing. It seems like most updates are not integrated yet, sadly there is no way to go back to previous firmware in Surplife. (the device is on 192.168.1.131 IP, ignore the 192.168.1.168 which is another device, also by Magic Home, that … Excerpt saved from GitHub on 2026-10-23.	Issue #116725 · 2024-05

Gathered from GitHub issues, pull requests, discussions and docs, and from r/homeassistant. These are individual reports, so check the linked thread and the date before you buy.

How it connects

Local push

Talks to the device on your network, and the device tells Home Assistant the moment something changes.

Found automatically over

DHCP

Details

Installs (analytics)	8,994 (1.27%)
Added in	Home Assistant 0.25
Set up in the UI	Yes
Maintainers	@icemanch

Devices listed in its documentation

0x01
0x03
0x04
0x06
0x07
0x08
0x09
0x0E
0x10
0x16
0x17
0x1A
0x1C
0x1E
0x21
0x25
0x33
0x35
0x41
0x44
0x52
0x54
0x62
0x93
0x97
0xA1
0xA2
0xA3
0xA4
0xA6
0xA7
0xE1
0xE2
0x02

In ReReHome

Whatever HomeKit Bridge shares reaches Apple Home as normal HomeKit accessories behind your Home Assistant bridge, so ReReHome shows and controls them like any other.

Bridges get their own settings page listing the accessories behind them.