Energy

Indevolt

indevolt

Built inLocal pollingPlatinum

The Indevolt integration enables direct local communication between Home Assistant and your Indevolt energy storage devices.

Documentation Source code

In Apple Home through HomeKit Bridge

What HomeKit Bridge makes of each kind of entity this integration creates, read from its source code. A device only gets the ones that apply to it.

Entity	Shows up as	Note
`switch`	Switch or outlet
`binary_sensor`	Sensor (motion, contact, leak, smoke…)
`sensor`	Sensor (temperature)
`button`	Button (as a switch)
`select`	Mode picker (as switches)

What people report

Indevolt batteries and inverters work locally via the integration; some generation-specific sensors differ and a 2400 W cap was fixed for SolidFlex 3000.

Works4
Partly works1

Device	In Home Assistant	What they said	Source
Indevolt BK1600 / BK1600 Ultra	Works	Listed; energy mode needs non-Outdoor mode, inverter temp only when active Saved copy Supported devices: BK1600 / BK1600 Ultra; SolidFlex 1200; SolidFlex 2000 / PowerFlex 2000; SolidFlex 3000 / PowerFlex 3000; SolidFlex 3600 / PowerFlex 3600. Limitations: Real-time configuration changes may appear with a small delay in Home Assistant and the Indevolt app. Energy mode can only be set when the device is not in "Outdoor / Portable"-mode (BK1600 / BK1600 Ultra). Some sensors are device generation-specific and may not appear for all models. Some sensors / configurations available in the app are not (yet) available in the integration. The inverter temperature only shows when the … Excerpt saved from home-assistant.io on 2026-10-23.	Docs
Indevolt SolidFlex / PowerFlex 2000	Works	Listed as supported Saved copy Supported devices: BK1600 / BK1600 Ultra; SolidFlex 1200; SolidFlex 2000 / PowerFlex 2000; SolidFlex 3000 / PowerFlex 3000; SolidFlex 3600 / PowerFlex 3600. Limitations: Real-time configuration changes may appear with a small delay in Home Assistant and the Indevolt app. Energy mode can only be set when the device is not in "Outdoor / Portable"-mode (BK1600 / BK1600 Ultra). Some sensors are device generation-specific and may not appear for all models. Some sensors / configurations available in the app are not (yet) available in the integration. The inverter temperature only shows when the … Excerpt saved from home-assistant.io on 2026-10-23.	Docs
Indevolt SolidFlex / PowerFlex 3600	Works	Listed as supported Saved copy Supported devices: BK1600 / BK1600 Ultra; SolidFlex 1200; SolidFlex 2000 / PowerFlex 2000; SolidFlex 3000 / PowerFlex 3000; SolidFlex 3600 / PowerFlex 3600. Limitations: Real-time configuration changes may appear with a small delay in Home Assistant and the Indevolt app. Energy mode can only be set when the device is not in "Outdoor / Portable"-mode (BK1600 / BK1600 Ultra). Some sensors are device generation-specific and may not appear for all models. Some sensors / configurations available in the app are not (yet) available in the integration. The inverter temperature only shows when the … Excerpt saved from home-assistant.io on 2026-10-23.	Docs
Indevolt SolidFlex 3000 Hybrid Pro	Works	Power limit entities capped at 2400 W; fixed in follow-up PR Saved copy The problem On my Indevolt SolidFlex 3000 Hybride Pro, three number entities have a hard-coded `native_max_value` of 2400 W: - `max_ac_output_power` - `inverter_input_limit` - `feedin_power_limit` The device itself is configured for 3000 W (via the Indevolt app) and HA reads this value back correctly. The entity state is `3000` while its `max` attribute is `2400`: [code] Because of this cap, these values can't be set above 2400 W from Home Assistant (UI and service calls are rejected), so the device's 3000 W rating can't be used from HA, and the feed-in limit in particular can't be raised to … Excerpt saved from GitHub on 2026-10-23.	Issue #185099 · 2026-10
Indevolt SolidFlex 1200	Partly works	Listed but identifies itself as a SolidFlex 2000 Saved copy Supported devices: BK1600 / BK1600 Ultra; SolidFlex 1200; SolidFlex 2000 / PowerFlex 2000; SolidFlex 3000 / PowerFlex 3000; SolidFlex 3600 / PowerFlex 3600. Limitations: Real-time configuration changes may appear with a small delay in Home Assistant and the Indevolt app. Energy mode can only be set when the device is not in "Outdoor / Portable"-mode (BK1600 / BK1600 Ultra). Some sensors are device generation-specific and may not appear for all models. Some sensors / configurations available in the app are not (yet) available in the integration. The inverter temperature only shows when the … Excerpt saved from home-assistant.io on 2026-10-23.	Docs

Gathered from GitHub issues, pull requests, discussions and docs, and from r/homeassistant. These are individual reports, so check the linked thread and the date before you buy.

How it connects

Local polling

Talks to the device on your network, asking it for updates every so often.

Found automatically over

DHCP
Bonjour (zeroconf)

Details

Installs (analytics)	313 (0.04%)
Quality scale	Platinum
Added in	Home Assistant 2026.3
Set up in the UI	Yes
Maintainers	@xirt, @INDEVOLT, @indevolt-y

Devices listed in its documentation

BK1600 / BK1600 Ultra
SolidFlex 1200
SolidFlex 2000 / PowerFlex 2000
SolidFlex 3000 / PowerFlex 3000
SolidFlex 3600 / PowerFlex 3600

Limitations from the docs

Real-time configuration changes may appear with a small delay in Home Assistant and the Indevolt app.
Energy mode can only be set when the device is not in "Outdoor / Portable"-mode (BK1600 / BK1600 Ultra).
Some sensors are device generation-specific and may not appear for all models.
Some sensors / configurations available in the app are not (yet) available in the integration.
The inverter temperature only shows when the inverter is active (BK1600 / BK1600 Ultra).
The SolidFlex 1200 identifies itself as a SolidFlex 2000 device.

In ReReHome

Whatever HomeKit Bridge shares reaches Apple Home as normal HomeKit accessories behind your Home Assistant bridge, so ReReHome shows and controls them like any other.

Bridges get their own settings page listing the accessories behind them.