ISEO Argo BLE Lock
iseo_argo_ble
The ISEO Argo BLE integration connects Home Assistant to ISEO Argo smart locks over Bluetooth Low Energy. ISEO is an Italian security manufacturer specializing in high-security cylinders and electronic access control, widely used in residential and commercial buildings across Italy and Switzerland.
In Apple Home through HomeKit Bridge
What HomeKit Bridge makes of each kind of entity this integration creates, read from its source code. A device only gets the ones that apply to it.
| Entity | Shows up as | Note |
|---|---|---|
lock | Lock | Needs its own HomeKit Bridge in accessory mode |
What people report
ISEO Argo BLE lock integration added in 2026; supports unlock only and one Bluetooth connection.
- Works1
- Partly works1
| Device | In Home Assistant | In Apple Home | What they said | Source |
|---|---|---|---|---|
| ISEO X1R Smart lock | Works Local | Momentary actuator; unlock supported, lock action not; one BLE connection at a timeSaved copyLimitations: The lock only supports one active Bluetooth connection at a time. Close the Argo app on all phones before unlocking or during setup. The ISEO X1R is a momentary actuator: it re-latches automatically after every unlock. The lock action is therefore not supported. Excerpt saved from home-assistant.io on 2026-10-23. | Docs | |
| Aqara Smart Door Lock 7704 | Partly works Local | Wrongly offered as ISEO Argo discovery; matcher fixed in later releaseSaved copyI think this is what you need. "details": { "path": "/org/bluez/hci0/dev_", "props": { "Address": “*", "AddressType": "random", "Name": "Aqara Smart Door Lock 7704", "Alias": "Aqara Smart Door Lock 7704", "Paired": false, "Bonded": false, "Trusted": false, "Blocked": false, "LegacyPairing": false, "CablePairing": false, "Connected": false, "UUIDs": [], "Adapter": "/org/bluez/hci0", "ManufacturerData": { "76": { "type": " ", "repr": "b'\\x061\\x00\\xcc\\x95b=U\\xc4\\x06\\x00\\xc5\\x0e\\x03\\x02\\xcf+^\\x93'" } }, "ServicesResolved": false, "AdvertisingFlags": { "typ Excerpt saved from GitHub on 2026-10-23. | Issue #181625 · 2026-09 |
Gathered from GitHub issues, pull requests, discussions and docs, and from r/homeassistant. These are individual reports, so check the linked thread and the date before you buy.
How it connects
Local polling
Talks to the device on your network, asking it for updates every so often.
Found automatically over
- Bluetooth
Details
| Installs (analytics) | 2 |
|---|---|
| Quality scale | Bronze |
| Added in | Home Assistant 2026.9 |
| Set up in the UI | Yes |
| Maintainers | @FezVrasta |
Limitations from the docs
- The lock only supports one active Bluetooth connection at a time. Close the Argo app on all phones before unlocking or during setup.
- The ISEO X1R is a momentary actuator: it re-latches automatically after every unlock. The lock action is therefore not supported.
In ReReHome
Whatever HomeKit Bridge shares reaches Apple Home as normal HomeKit accessories behind your Home Assistant bridge, so ReReHome shows and controls them like any other.
Bridges get their own settings page listing the accessories behind them.
