Nibe Heat Pump
nibe_heatpump
The Nibe Heat Pump integration allows you to control and monitor Nibe Heat Pumps in Home Assistant.
In Apple Home through HomeKit Bridge
What HomeKit Bridge makes of each kind of entity this integration creates, read from its source code. A device only gets the ones that apply to it.
| Entity | Shows up as | Note |
|---|---|---|
switch | Switch or outlet | |
climate | Thermostat | |
binary_sensor | Sensor (motion, contact, leak, smoke…) | |
sensor | Sensor (humidity, temperature) | |
water_heater | Water heater (as a thermostat) | |
button | Button (as a switch) | |
select | Mode picker (as switches) |
What people report
Nibe heat pumps connect through NibeGW over UDP or direct Modbus. Setup trouble mostly involves ports and firmware changes tied to myUplink.
- Works3
- Partly works1
| Device | In Home Assistant | In Apple Home | What they said | Source |
|---|---|---|---|---|
| Nibe 2120 pumps | Works | Support added in nibe 1.2.1Saved copyProposed change - Update of nibe to 1.2.1 with fix for 2120 pumps. ### Changelogs - `nibe`: https://github.com/yozik04/nibe/releases/tag/1.2.1 - `esphome-nibe`: https://github.com/elupus/esphome-nibe/releases/tag/v2.0.1 ## Type of change <!-- What type of change does your Excerpt saved from GitHub on 2026-10-23. | PR #81824 · 2022-11 | |
| Nibe S332 | Works Local | Support added via library bumpSaved copyBreaking change ## Proposed change This change is regarding the Nibe heat pump component. It bumps the component version and in that version are the changes for a newer model S332. https://github Excerpt saved from GitHub on 2026-10-23. | PR #140741 · 2025-03 | |
| Nibe VVM310 | Works Local | NibeGW validation timeout solved by correcting read/write portsSaved copy… out, which is not tolerated and hard-fails the config flow with no way to skip it. Hardware: - Board: LilyGO T-CAN485 running ESPHome 2026.9.0 with the `nibegw` external component (`elupus/esphome-nibe`) - Heat pump: Mitsubishi Heavy Industries HMA-100S / FDCW100VNX-A (NIBE-compatible RS485/MODBUS40 protocol, produced under the NIBE/MHI OEM partnership) - Home Assistant: 2026.9.3 (Home Assistant OS) - `nibe` python package version as bundled with `nibe_heatpump` in HA 2026.9.3 (traceback shows `python3.14/site-packages/nibe/connection/nibegw.py`) What happens: Adding the "Nibe Heat Pump" … Excerpt saved from GitHub on 2026-10-23. | Issue #183206 · 2026-09 | |
| Nibe F1255 | Partly works Local | Config validation write timeout; reverting firmware to 9443R7 fixed itSaved copyThe problem Bug Description for Nibe F1255 When attempting to configure the Nibe heat pump, a validation error occurs. The error happens during the connectivity check and results in a FieldError. Steps to Reproduce 1. Navigate to the configuration page of the Nibe heat pump in Home Assistant. 2. Enter the necessary connection details. 3. Start the connectivity check. 4. The error occurs when attempting to perform a write operation to the heat pump. Expected Behavior The configuration should be validated and saved successfully without triggering a WriteException. Actual Behavior The validation … Excerpt saved from GitHub on 2026-10-23. | Issue #120023 · 2024-06 |
Gathered from GitHub issues, pull requests, discussions and docs, and from r/homeassistant. These are individual reports, so check the linked thread and the date before you buy.
How it connects
Local polling
Talks to the device on your network, asking it for updates every so often.
Details
| Installs (analytics) | 1,114 (0.16%) |
|---|---|
| Added in | Home Assistant 2022.10 |
| Set up in the UI | Yes |
| Maintainers | @elupus |
In ReReHome
Whatever HomeKit Bridge shares reaches Apple Home as normal HomeKit accessories behind your Home Assistant bridge, so ReReHome shows and controls them like any other.
Bridges get their own settings page listing the accessories behind them.
