SwitchBot Bluetooth

Proposed change - Add pm25 sesnor ## Type of change - [ ] Dependency upgrade - [ ] Bugfix (non-breaking change which fixes an issue) - [ ] New integrat

Excerpt saved from GitHub on 2026-10-23.

I use switchbot BLE temp and humidity sensors. They can be used outdoor. So far I have had them more than a year and haven't changed the original batteries. I have them in almost every room and outside.

Excerpt saved from the Arctic Shift Reddit archive on 2026-10-23.

Just got an outdoor sensor, it should work. My Bluetooth SwitchBot sensors work in the freezer.

Excerpt saved from the Arctic Shift Reddit archive on 2026-10-23.

Proposed change This PR adds support for the SwitchBot Candle Warmer Lamp (`SwitchbotModel.CANDLE_WARMER_LAMP`) to the SwitchBot integration. The Candle Warmer Lamp is a brightness-only encrypted light. It is wired up like the other SwitchBot lights via the generic `SwitchbotLightEntity`, exposing a single `ColorMode.BRIGHTNESS` light entity: - `const.py`: register the model in `SupportedModels`, `CONNECTABLE_SUPPORTED_MODEL_TYPES`, `ENCRYPTED_MODELS` and `ENCRYPTED_SWITCHBOT_MODEL_TO_CLASS` (mapped to `switchbot.SwitchbotCandleWarmerLamp`). - `init.py`: register `[Platform.LIGHT, …

Excerpt saved from GitHub on 2026-10-23.

Switchbot. I use the curtain pullers and the blind tilts and they work great. They're not overly quiet, but not obnoxiously loud either. You will hear them. I believe they have a quiet mode where they slow the motor down but I've never been bothered enough to try it. They are battery powered, batteries last a really long time and are all rechargeable, you can also get solar panels to keep them topped up. These are included with the blind tilts and work great in my experience. Note the blind tilts won't raise or lower the blind, only tilt the slats, and you'll need to get two curtain puller …

Excerpt saved from the Arctic Shift Reddit archive on 2026-10-23.

One of my favourites combines our Apple TV and the SwitchBot curtains we own. When we start watching something from one of the streaming services, it automatically closes the curtains and dims the lights. But not if we just chuck something up on YouTube. Wife approval is super high, and when we have people over to watch something, they always comment. Now if only I could get it to work when we watch a DVD on the PS5...

Excerpt saved from the Arctic Shift Reddit archive on 2026-10-23.

I use SwitchBot Indoor/Outdoor Thermo-Hygrometer which are BLE, work well, and are pretty cheap. I hsve a few other thermometers too, Hue outdoor motion sensors work well (but are pricey). YoLink work well, the update less often but have very good range and really long battery life. Ecowitt ones work nicely (I use one of their gateways). La Crosse View ones work OK most of the time, the Home Assistant integration is cloud-only (though you can use rtl433 to receive them if you want).

Excerpt saved from the Arctic Shift Reddit archive on 2026-10-23.

I'm using Switchbot IP65 Indoor/Outdoor Hygrometer/Thermometer sensors and they work well. They are bluetooth direct to the Switchbot integration in HA.

Excerpt saved from the Arctic Shift Reddit archive on 2026-10-23.

Switchbot. Got a really good discount as a kickstarter add on. Runs on Bluetooth and fits over the existing locks so I didn't need to change anything on the door itself. I have just upgraded one of them to the Lock Pro, but that one doesn't have HA integration yet :(

Excerpt saved from the Arctic Shift Reddit archive on 2026-10-23.

Proposed change Add support to Switchbot Lock Pro, based on Danielhiversen/pySwitchbot#241. ## Type of change - [ ] Dependency upgrade - [ ] Bugfix (non-breaking change which fixes an issue) - [ ] New integration (thank you!) - [x] New feature (which adds function

Excerpt saved from GitHub on 2026-10-23.

Supported devices: SwitchBot Lock Ultra (via a Matter hub); SwitchBot Motion Sensor (via a Matter hub); SwitchBot Multitasking Robot K11+ (Matter over Wi-Fi).

Excerpt saved from home-assistant.io on 2026-10-23.

Supported devices: SwitchBot Lock Ultra (via a Matter hub); SwitchBot Motion Sensor (via a Matter hub); SwitchBot Multitasking Robot K11+ (Matter over Wi-Fi).

Excerpt saved from home-assistant.io on 2026-10-23.

Supported devices: SwitchBot Lock Ultra (via a Matter hub); SwitchBot Motion Sensor (via a Matter hub); SwitchBot Multitasking Robot K11+ (Matter over Wi-Fi).

Excerpt saved from home-assistant.io on 2026-10-23.

FYI, you absolutely can pair the Switchbot presence sensor directly to HA via Bluetooth (which gives you occupancy and light level) without using the Hub. You just need to set up the presence sensor settings in the Switchbot app first…

Excerpt saved from the Arctic Shift Reddit archive on 2026-10-23.

… implementation (~93 lines, mostly tests) following recent merged PRs (#155124, #155309). Happy to receive feedback and make adjustments! ## Proposed change Add SwitchBot Presence Sensor support to the switchbot Bluetooth integration. The device combines mmWave radar, PIR sensor, and light detection. Already supported by PySwitchbot 0.73.0 (PR #410) and the `switchbot_cloud` integration (#155309), but missing from the Blu

Excerpt saved from GitHub on 2026-10-23.

Proposed change - Add S20 ## Type of change - [ ] Dependency upgrade - [ ] Bugfix (non-breaking change which fixes an issue) - [ ] New integration (than

Excerpt saved from GitHub on 2026-10-23.

ESP32 proxy changed all by switchbot devices further away from my server into hyper responsive tools. Bloody amazing

Excerpt saved from the Arctic Shift Reddit archive on 2026-10-23.

The problem I added succesfully 4x indoor/outdoor thermometer firmware V0.4 to HA. Once they were added, I was able to update them to firmware V0.9 and they keep working with the integration. However I upgraded two other new devices from V0.4 to V0.9 before adding them in HA, those ones are not found by the switchbot integration. The 2 new devices were part of the same 4 devices box, I bought 4x indoor/outdoor meter pack & only 2 of them with firmware V0.4 were detected/added by the integration, I think this is because the were detected while running with oldest stock firmware. As it's a gold …

Excerpt saved from GitHub on 2026-10-23.

Proposed change Add support for the Switchbot Remote to the _Switchbot Bluetooth_ integration. Currently just to monitor the battery level of the remote. The dependency upgrade PR has already been merged: https://github.com/hom

Excerpt saved from GitHub on 2026-10-23.

Looking for the same. Stay away from switchbot lock pro if you are in the USA. I have one sitting on a shelf unusable since they don’t sell or carry the proper components for USA locks. I have a Ubiquiti PoE door bell with fingerprint reader and some people have coupled that with a smart lock and use it to unlock their door.

Excerpt saved from the Arctic Shift Reddit archive on 2026-10-23.

The problem I have a SwitchBot Lock Pro (firmware v1.8) that works correctly over BLE with an ESPHome Bluetooth Proxy (ESP32). However, the device is not recognized by Home Assistant when adding the "SwitchBot Bluetooth" integration, it simply does not appear in the list of detected devices. The ESPHome logs clearly show the device being detected, but Home Assistant never identifies it as a supported SwitchBot Lock Pro. ### What version of Home Assistant Core has the issue? core-2025.8.3 ### What was the last working version of Home Assistant Core? core-2025.8.3 ### What type of installation …

Excerpt saved from GitHub on 2026-10-23.

Proposed change Adds support for the switchbot keypad touch. This requires merging of this pull request in pySwitchbot. Currently supports battery level and a sensor which changes on successful attempts. ## Type of change <!-- What type of change does your PR introduce to Home Assistant? NOTE: Please, check only 1! box! If your PR requires multiple boxes to be

Excerpt saved from GitHub on 2026-10-23.

The problem I have a Switchbot lock ultra + keypad vision. The lock ultra is integrated into HA via Switchbot-BLE (working like a charme). 2026.02 added the keypad vision to the Switchbot integration, but it is not recognized when trying to add via Switchbot integration. The keypad vision shows the proper data (Service Data + the byte string to recognize and distinguish the keypad vision among Switchbot devices -> b'\x00\x11\x03x' as in the adv_parser.py of pyswitchbot library), see log entry and BLE advertisement data within HA. Active BLE Proxy is used (and working with the lock ultra). …

Excerpt saved from GitHub on 2026-10-23.