Electrolux Wellbeing

Supported devices: Electrolux Well A5 Purifiers; WA51-302WT; WA51-302GY; WA51-303GY; Electrolux Well A7 Purifiers; WA71-302GY; WA71-302DG; WA71-304GY; Electrolux Pure A9 Purifiers; PA91-406GY; PA91-606DG; EHAW4010AG; EHAW6020AG; Electrolux Pure Multi 700 Humidifier-Purifier; EPU73771DG (all data is readable, but only fan can be controlled); Electrolux PUREi9 Vacuum Robot; PUREi9; PUREi9.2; Electrolux 600/700 Series Vacuum Robot; Clean 600; Hygienic 600; Hygienic 700; Ultimate 700; AEG AX5 Air Purifiers; AX51-304WT; AEG AX7 Air Purifiers; AX71-304GY; AX71-304DG; AEG AX9 Air Purifiers; …

Excerpt saved from the README on 2026-10-23.

Using the new functionality from issue #211 , the Air Conditioner I have is getting an error on connection of: > Failed setup, will retry: 'Azul' is not a valid Model My air conditioner is: > Product Number : 950011617 > Firmware : VM211.A.05.13.05_AZUL > Model number : AXP34U339HW (not CW, as this air conditioner can provide heat as well) > Model : AEG Comfort 6000 Air Conditioner Is some additional config required ? Manual if required, which also lists additional model numbers if needed.

Excerpt saved from GitHub on 2026-10-23.

… EHAW4010AG; EHAW6020AG; Electrolux Pure Multi 700 Humidifier-Purifier; EPU73771DG (all data is readable, but only fan can be controlled); Electrolux PUREi9 Vacuum Robot; PUREi9; PUREi9.2; Electrolux 600/700 Series Vacuum Robot; Clean 600; Hygienic 600; Hygienic 700; Ultimate 700; AEG AX5 Air Purifiers; AX51-304WT; AEG AX7 Air Purifiers; AX71-304GY; AX71-304DG; AEG AX9 Air Purifiers; AX91-404GY; AX91-404DG; AX91-405DG; AX91-604GY; AX91-604DG; AEG RX9 Vacuum Robot; RX9; RX9.2; AEG 6000/7000 Series Vacuum Robot; 6000 Robot Vacuum Cleaner; 7000 Robot Vacuum Cleaner.

Excerpt saved from the README on 2026-10-23.

I have added basic support for the 700 Series Robot Vacuum, the successor to the PUREi9 Series, which differs from the PUREi9 in terms of capabilities. In this version, support for the 700 Series Vacuum Mode (also known as Power Mode in PUREi9) is not yet included, as I am still determining the best approach to implement this feature. However, this basic implementation should allow users to set up essential automations. This implementation provides basic vacuum support for the following models: Electrolux - Clean 600 - Hygienic 600 - Hygienic 700 - Ultimate 700 AEG - 6000 Robot Vacuum Cleaner …

Excerpt saved from GitHub on 2026-10-23.

This change adds native Home Assistant climate support for Electrolux air conditioning units (specifically tested with COMFORT 600). It allows users to control temperature, HVAC modes (Auto, Cool, Dry, Fan only), fan speeds, and auxiliary features like vertical swing and sleep mode. Key changes: - Extended the API client to handle `PORTABLE_AIR_CONDITIONER` devices. - Implemented the `climate` platform using Home Assistant's `ClimateEntity`. - Mapped device-specific attributes to standard HA climate features. - Ensured robust state reporting by utilizing both `applianceState` and …

Excerpt saved from GitHub on 2026-10-23.

Description Fixes #159 (based on your hard work of #168 ). This PR adds a model mapping to properly handle dehumidifier devices that report type 'DH', which previously failed with "DH is not a valid model" error. ### Changes - Added a `_model_mapping` dictionary in `WellbeingApiClient` to translate device types to model names - Added mapping from 'DH' to 'UltimateHome 700' for dehumidifiers - Updated model name assignment to use this mapping with fallback to original type ### Testing Successfully tested on a real Electrolux dehumidifier device: - Device now initializes correctly as …

Excerpt saved from GitHub on 2026-10-23.

Supported devices: Electrolux Well A5 Purifiers; WA51-302WT; WA51-302GY; WA51-303GY; Electrolux Well A7 Purifiers; WA71-302GY; WA71-302DG; WA71-304GY; Electrolux Pure A9 Purifiers; PA91-406GY; PA91-606DG; EHAW4010AG; EHAW6020AG; Electrolux Pure Multi 700 Humidifier-Purifier; EPU73771DG (all data is readable, but only fan can be controlled); Electrolux PUREi9 Vacuum Robot; PUREi9; PUREi9.2; Electrolux 600/700 Series Vacuum Robot; Clean 600; Hygienic 600; Hygienic 700; Ultimate 700; AEG AX5 Air Purifiers; AX51-304WT; AEG AX7 Air Purifiers; AX71-304GY; AX71-304DG; AEG AX9 Air Purifiers; …

Excerpt saved from the README on 2026-10-23.

Supported devices: Electrolux Well A5 Purifiers; WA51-302WT; WA51-302GY; WA51-303GY; Electrolux Well A7 Purifiers; WA71-302GY; WA71-302DG; WA71-304GY; Electrolux Pure A9 Purifiers; PA91-406GY; PA91-606DG; EHAW4010AG; EHAW6020AG; Electrolux Pure Multi 700 Humidifier-Purifier; EPU73771DG (all data is readable, but only fan can be controlled); Electrolux PUREi9 Vacuum Robot; PUREi9; PUREi9.2; Electrolux 600/700 Series Vacuum Robot; Clean 600; Hygienic 600; Hygienic 700; Ultimate 700; AEG AX5 Air Purifiers; AX51-304WT; AEG AX7 Air Purifiers; AX71-304GY; AX71-304DG; AEG AX9 Air Purifiers; …

Excerpt saved from the README on 2026-10-23.

First of all, thank you for your this integration! Adding the Well A5 (AX51-304WT) initially gave a fan speed error and the fan couldn't be controlled. Updating api.py as follows allowed for proper fan control and speed readout: @property def speed_range(self) -> tuple: if self.model == "WELLA7": return 1, 5 if self.model == "PUREA9": return 1, 9 if self.model == "WELLA5": return 1, 5 return 0, 0 Following values are available and seem to be updating well. I only haven't seen a change in the "Status" sensor.

Excerpt saved from GitHub on 2026-10-23.

Supported devices: Electrolux Well A5 Purifiers; WA51-302WT; WA51-302GY; WA51-303GY; Electrolux Well A7 Purifiers; WA71-302GY; WA71-302DG; WA71-304GY; Electrolux Pure A9 Purifiers; PA91-406GY; PA91-606DG; EHAW4010AG; EHAW6020AG; Electrolux Pure Multi 700 Humidifier-Purifier; EPU73771DG (all data is readable, but only fan can be controlled); Electrolux PUREi9 Vacuum Robot; PUREi9; PUREi9.2; Electrolux 600/700 Series Vacuum Robot; Clean 600; Hygienic 600; Hygienic 700; Ultimate 700; AEG AX5 Air Purifiers; AX51-304WT; AEG AX7 Air Purifiers; AX71-304GY; AX71-304DG; AEG AX9 Air Purifiers; …

Excerpt saved from the README on 2026-10-23.

Electrolux Wellbeing Releases 1.3.6 Here is the actual information about my device: Device Type: Air purifier Model: Pure 500 Ultimate Home 300AP/500AP NIU: VM213_A_04.43.06_MUJU After updating to version 1.3.6, when I click on Fan Speed and execute the Smart mode, the same error message still appears. I am attaching the log file. This issue has existed for a long time, but it still persists. home-assistant_2025-04-08T16-08-25.793Z.log

Excerpt saved from GitHub on 2026-10-23.

This is minimal working code for adding read-only capabilities for Pure Multi 700. There's issue with capabilities listed in `api.developer.electrolux.one` - only `Fanspeed` is listed (except for read-only sensors) and that one is supported as a valid command. This is not the case in mobile app and https://github.com/Woyken/py-electrolux-ocp which use `api.ocp.electrolux.one`/`api.eu.ocp.electrolux.one` (plus `v2` instead of `v1`). I contacted Electrolux support about that. I'm also not sure about `model_name` being actually a model name, it rather seems to be a model driver or model series - …

Excerpt saved from GitHub on 2026-10-23.