AVM, FRITZ!Box, Comet

FRITZ!Box

homebridge-fritz · v0.9.5

LocalArchived

Adds FRITZ!Box guest WLAN switch, FRITZ!DECT outlets, thermostats, buttons and window sensors to HomeKit.

View on npm Source code

What it says it supports

Brands

AVM
FRITZ!Box
Comet
Deutsche Telekom

Devices it names

FRITZ!DECT 200
FRITZ!DECT 210
FRITZ!Powerline 510
FRITZ!Powerline 540
FRITZ!DECT 300
FRITZ!DECT 301
Comet!DECT
FRITZ!DECT 400
FRITZ!DECT 100 repeater
HAN FUN window sensors

Shows up in Apple Home as from its README

Sensor readings in its code

What people report

Comet DECT and FRITZ!DECT thermostats and outlets work; battery level fails on non-German FRITZ!OS and some DECT devices are unsupported.

Works1
Partly works2
Not working1
Requested1

Device	Status	What they said	Source
Comet DECT thermostat	Works	Works for users on FRITZ!OS 6.80 Saved copy I am sorry, but I am not familiar with this platform. I used the Homebridge app for setup. The debug log shows that the Fritz!DECT300 does not appear as a thermostat (I use 3 Comet DECT 1 Fritz!DECT300 and 1 Fritz!DECT200) The ID 117950293256 of Fritz!DECT300 shows up as a sensor. Am 25.02.2017 um 10:21 schrieb andig : Could you share the homebridge debug output? I assume the dect300 does not appear in the list of thermostats found? Would you be able to run a quick diagnostic program using node from the fritzapi folder?, You are receiving this because you commented. Reply to this email … Excerpt saved from GitHub on 2026-10-22.	Issue #19 · 2017-02
FRITZ!DECT 200 outlet	Partly works	Creates outlet plus temperature sensor; duplicate names conflict with Alexa plugin Saved copy Sorry, but if I left ”outlet-1” it is ok and the device was discovered with no issues: [17/9/2020, 09:19:46] [My FRITZ!Box] Alarm sensors found: none [17/9/2020, 09:19:46] [My FRITZ!Box] Buttons found: none [17/9/2020, 09:19:46] [My FRITZ!Box] Outlets found: 087610048016 [17/9/2020, 09:19:47] [My FRITZ!Box] Thermostats found: none [17/9/2020, 09:19:47] [My FRITZ!Box] Sensors found: none [17/9/2020, 09:19:47] Initializing platform accessory 'DECT200'… Il giorno 17 set 2020, alle ore 11:50, Thomas ha scritto: Hi! You need to replace "outlet-1" with the ID of your device. The outlet-1 is just a … Excerpt saved from GitHub on 2026-10-22.	Issue #147 · 2020-09
FRITZ!DECT 300 thermostat	Partly works	Temperature shown but no control reported on FRITZ!OS 6.80/6.81; Comet DECT works Saved copy I am sorry, but I am not familiar with this platform. I used the Homebridge app for setup. The debug log shows that the Fritz!DECT300 does not appear as a thermostat (I use 3 Comet DECT 1 Fritz!DECT300 and 1 Fritz!DECT200) The ID 117950293256 of Fritz!DECT300 shows up as a sensor. Am 25.02.2017 um 10:21 schrieb andig : Could you share the homebridge debug output? I assume the dect300 does not appear in the list of thermostats found? Would you be able to run a quick diagnostic program using node from the fritzapi folder?, You are receiving this because you commented. Reply to this email … Excerpt saved from GitHub on 2026-10-22.	Issue #19 · 2017-02
FRITZ!Box thermostat battery level (Italian FRITZ!OS)	Not working	Battery level not shown because language-specific regex fails Saved copy Hi, thank you for your work, I Have a problem battery level in homekit In homekit the battery level of the heads is not displayed, as an account in the config I enter the administrative one with all the permissions [Homebridge] [12/30/2019, 4:27:37 PM] [Fritzbox7590] Updating thermostat 099950167xxx [Homebridge] [12/30/2019, 4:27:37 PM] [Fritzbox7590] Getting thermostat 099950167xxx temperature [Homebridge] [12/30/2019, 4:27:37 PM] [Fritzbox7590] Getting thermostat 099950167xxx target temperature [Homebridge] [12/30/2019, 4:27:37 PM] [Fritzbox7590] Getting thermostat 099950167xxx battery … Excerpt saved from GitHub on 2026-10-22.	Issue #99 · 2019-12
Telekom DECT LED bulb (HAN-FUN)	Requested	Asked for HAN-FUN LED lamp support; no fix shown Saved copy Hello, is it possible to integrate the DECT LED Blub form Telekom. can't this ANI at the LOG [2020-8-26 15:28:23] [My FRITZ!Box] Updating temperature sensor 08761085994x [2020-8-26 15:29:23] [My FRITZ!Box] Updating outlet 08761022689x [2020-8-26 15:29:23] [My FRITZ!Box] Updating outlet 08761022959x [2020-8-26 15:29:23] [My FRITZ!Box] Updating outlet 08761007912x [2020-8-26 15:29:23] [My FRITZ!Box] Updating outlet 08761008709x [2020-8-26 15:29:23] [My FRITZ!Box] Updating outlet 11657001830x [2020-8-26 15:29:23] [My FRITZ!Box] Updating outlet 08761007912x [2020-8-26 15:29:23] [My FRITZ!Box] … Excerpt saved from GitHub on 2026-10-22.	Issue #145 · 2020-08

Gathered from the plugin’s GitHub issues, pull requests, discussions, wiki and docs, and from r/homebridge. These are individual reports, so check the linked thread and the date before you buy.

How it connects

Local

FRITZ!Box API over LAN

You’ll need

FRITZ!Box

Compatibility

Verified by Homebridge	No
Homebridge versions	^1.0.0
Homebridge 2.0	No
Node.js	>4.0.0
Settings in Homebridge UI	No
Matter	No
License	MIT

Community signals

Downloads a week	30
Downloads a month	173
GitHub stars	74
Open issues	41
Closed issues	79
Last code push	2022-02-02
Latest version	0.9.5 (2020-04-27)
First published	2016-07-22
Releases	39

In ReReHome

Whatever this plugin publishes reaches Apple Home as a normal HomeKit accessory behind your Homebridge bridge, so ReReHome shows and controls it like any other.

Bridges get their own settings page listing the accessories behind them.

Caveats from the README

This plugin is archived, deprecated or on Homebridge’s unmaintained list.

HomeKit services in its code

Found by scanning the published npm package. A plugin can register a service only for some devices.

BatteryService
ContactSensor
Outlet
Switch
TemperatureSensor
Thermostat

Sources

npm: https://www.npmjs.com/package/homebridge-fritz
Source code: https://github.com/andig/homebridge-fritz
Issues: https://github.com/andig/homebridge-fritz/issues