Homematic IP

Welcome to homebridge-homematicip! Configuring per-device options HmIP devices can be configured in the Homebridge UI under Per-device Options. Each entry requires the device's SGTIN, which Apple Home displays as its serial number. The equivalent `config.json` format uses a `devices` array: [code] Enter the SGTIN without dashes and using capital letters. To hide the Home Security System, use the separate `hideSecuritySystem` option shown in the Homebridge UI. Upgrading from a version before 2.8.0? Follow the migration guide before opening the graphical plugin settings. Devices can be removed …

Excerpt saved from GitHub on 2026-10-22.

Device Information Device Name: Homematic IP Schaltaktor für Unterputzmontage – kompakt Model: HmIP-FS6 Device Type: FULL_FLUSH_SWITCH_COMPACT Functionality: 6-channel compact flush-mount switching actuator (on/off). Description Hi! Could you please add support for the new HmIP-FS6 actuator? It is currently not recognized by the plugin. Since it is a standard switching actuator, it should ideally be exposed to HomeKit as a regular switch or light. Log Output [27/08/2026, 17:43:41] [HomematicIP] Device not implemented: HmIP-FS6 - Switch via type FULL_FLUSH_SWITCH_COMPACT Thank you very much …

Excerpt saved from GitHub on 2026-10-22.

Hi, Would it be possible to add support for the following devices in the future? HmIPW-DRI16 HmIP-RGBW I’m currently using the HmIPW-DRI16 together with reed contacts for wired window and door sensors. The HmIP-FSI16 is already listed as supported. However, when using it with the HCU, I get the following error: [8/3/2026, 3:56:40 PM] [HomematicIP] No functional channels found for device Licht Aufbewahrungsschuppen Carport [8/3/2026, 3:56:40 PM] [HomematicIP] Register accessory: Licht Aufbewahrungsschuppen Carport (3014F711A*) -> uuid -–9-719b1c7fc6d2

Excerpt saved from GitHub on 2026-10-22.

Welcome to homebridge-homematicip! Configuring per-device options HmIP devices can be configured in the Homebridge UI under Per-device Options. Each entry requires the device's SGTIN, which Apple Home displays as its serial number. The equivalent `config.json` format uses a `devices` array: [code] Enter the SGTIN without dashes and using capital letters. To hide the Home Security System, use the separate `hideSecuritySystem` option shown in the Homebridge UI. Upgrading from a version before 2.8.0? Follow the migration guide before opening the graphical plugin settings. Devices can be removed …

Excerpt saved from GitHub on 2026-10-22.

Hi, Would it be possible to add support for the following devices in the future? HmIPW-DRI16 HmIP-RGBW I’m currently using the HmIPW-DRI16 together with reed contacts for wired window and door sensors. The HmIP-FSI16 is already listed as supported. However, when using it with the HCU, I get the following error: [8/3/2026, 3:56:40 PM] [HomematicIP] No functional channels found for device Licht Aufbewahrungsschuppen Carport [8/3/2026, 3:56:40 PM] [HomematicIP] Register accessory: Licht Aufbewahrungsschuppen Carport (3014F711A*) -> uuid -–9-719b1c7fc6d2

Excerpt saved from GitHub on 2026-10-22.

… little bit confusing is an status indicator which shouldn't be adjustable. Yes. The plugin is limited to what Apple supports as accessory services. The "window service" is normally used for motor controlled windows (like a roof window), that's why you can manually change the position. You will see that the target position is ignored when looking at the logs. There is not dedicated "status" device which shows more than open/closed. On top the status is shown twice - don't know why? Yes. See issue #60 . I have implemented to services for the window. One contact sensor (with contact / no …

Excerpt saved from GitHub on 2026-10-22.

I am having the same issue with HmIP-SWDO-I window sensor. I already cleared the homebridge device cache which did not help. I'd prefer to only use the contact sensor or to make it a configurable feature since I can declare a contact sensors as a windows sensor in the home app.

Excerpt saved from GitHub on 2026-10-22.

Hi, Would it be possible to add support for the following devices in the future? HmIPW-DRI16 HmIP-RGBW I’m currently using the HmIPW-DRI16 together with reed contacts for wired window and door sensors. The HmIP-FSI16 is already listed as supported. However, when using it with the HCU, I get the following error: [8/3/2026, 3:56:40 PM] [HomematicIP] No functional channels found for device Licht Aufbewahrungsschuppen Carport [8/3/2026, 3:56:40 PM] [HomematicIP] Register accessory: Licht Aufbewahrungsschuppen Carport (3014F711A*) -> uuid -–9-719b1c7fc6d2

Excerpt saved from GitHub on 2026-10-22.

Hi @MartinDdorf , sorry for the late reply. Yes, you're right. The "Home Security System" is always shown since it's a basic function in the HomematicIP world. But it shouldn't appear in all rooms. You can assign the device to a room (e.g. standard room) and it should only appear there. You can also hide in from your favourites when changing the settings for this device. I will look into it if I check for the presence of the "Security Zone" first. If you don't have a security zone the device definitely is useless. On the other hand, a simple door/window sensor is sufficient for the "Home …

Excerpt saved from GitHub on 2026-10-22.