Bluetti BT

Adds support for AC200PL based on information from dpb03 in issue #112. Initial tests on two AC200PL devices appear successful. Based on existing support for AC200L. No new features added.

Excerpt saved from GitHub on 2026-10-23.

Following up on #161 originally by @markld95 , added the needed test case. > This PR adds support for the Bluetti AC2A device to the integration. > > Includes: > > * New ac2a.py class under devices/, using ProtocolV2Device > > * Register mappings for battery percent, AC/DC power, power lifting mode, etc. > > * Added AC2A to the device regex and build logic in device_builder.py > > * Added AC2A_"_* to the bluetooth discovery section in manifest.json > > > Confirmed working in Home Assistant: > > * Device is auto-discovered via Bluetooth > > * Sensors correctly show battery level, AC/DC output …

Excerpt saved from GitHub on 2026-10-23.

I added support for AC70 and AC70P based on comments in #111 . This is tested and working on the AC70 but I don't have access to an AC70P

Excerpt saved from GitHub on 2026-10-23.

@ Adds Home Assistant discovery support for the BLUETTI Premium 100 V2 (`PR100V2 `). ### Changes - Added `PR1*` Bluetooth `local_name` matcher so the Premium 100 V2 is auto-discovered. - Added `PR3*` matcher as well: `PR30V2` already exists in the library but had no matcher (the device-name test only catches this once the library bump below brings `PR30V2` into the pinned release). - Bumped `bluetti-bt-lib` requirement to `0.1.7` and the integration version to `0.2.2`. ### Dependency > [!IMPORTANT] > This depends on Patrick762/bluetti-bt-lib#70, which adds the `PR100V2` device class. CI here …

Excerpt saved from GitHub on 2026-10-23.

Premium 30 V2 advertises over BLE as PR30V2* and uses service UUID FF00. The device is fully compatible with the existing EL3 protocol implementation. No changes to bluetti_bt_lib were required. Tested with: hassio-bluetti-bt 0.2.1 bluetti-bt-lib 0.1.6 HA Core 2026.2.3 Firmware validated: ARM v2203.09 DSP v2202.11 BMS v1087.06 IoT module SN IoT2548110254037 Discovery works correctly after adding: { "local_name": "PR3*" } All sensors populate correctly and update live.

Excerpt saved from GitHub on 2026-10-23.

Seems that encryption is rolling out to more than apex series (i have AP300) here's our issue on gh https://github.com/Patrick762/hassio-bluetti-bt/issues/243 only reliable way i found is to go through official channels (meaning official bluetti bluetooth lib https://github.com/bluetti-official/bluetti-bluetooth-lib) this requires an email with your serial number to bluetti support. BUT that's not the end of it, lib is old, year+ old, it didn't have necessary addresses whitelisted, i had to patch the C binary of this lib to get it working with my Apex 300, i did it with claude code and now i …

Excerpt saved from GitHub on 2026-10-23.

I'm on the latest, 0.2.2, and it does not work at all with either of my AC500 units. Is there a setting I'm not seeing? > > I already have the cloud integration to supplement this version but the cloud goes down far too much and doesn't have all of the functionality I use in the BT version. AC500 seems to be supported at https://github.com/nhurman/bluetti_mqtt. My EP500P unit is supported with this PR: https://github.com/nhurman/bluetti_mqtt/pull/5

Excerpt saved from GitHub on 2026-10-23.

Seems that encryption is rolling out to more than apex series (i have AP300) here's our issue on gh https://github.com/Patrick762/hassio-bluetti-bt/issues/243 only reliable way i found is to go through official channels (meaning official bluetti bluetooth lib https://github.com/bluetti-official/bluetti-bluetooth-lib) this requires an email with your serial number to bluetti support. BUT that's not the end of it, lib is old, year+ old, it didn't have necessary addresses whitelisted, i had to patch the C binary of this lib to get it working with my Apex 300, i did it with claude code and now i …

Excerpt saved from GitHub on 2026-10-23.

The same thing happened to my EP500P after firmware upgrade. Now it uses an encrypted protocol. To retain control, we can switch to the official integration (https://github.com/bluetti-official/bluetti-home-assistant), but it's not local, it's cloud-based. Latest hassio-bluetti-bt (v2.xxx) should also work, but it can't control devices via encryped protocol.

Excerpt saved from GitHub on 2026-10-23.

PLEASE ADD AC50B

Excerpt saved from GitHub on 2026-10-23.

Following similar structure to https://github.com/Patrick762/hassio-bluetti-bt/pull/184, adding support for the Elite 30 V2, with BLE advertised name EL30V2 Builds on top of the encryption branch (https://github.com/Patrick762/hassio-bluetti-bt/pull/173)

Excerpt saved from GitHub on 2026-10-23.