Govee BLE HCI monitor sensor integration
Home-Is-Where-You-Hang-Your-Hack/sensor.goveetemp_bt_hci · vv0.10.3
Govee Temperature/Humidity BLE Home Assistant Component
In Apple Home through HomeKit Bridge
What HomeKit Bridge makes of each kind of entity this integration creates, read from its source code. A device only gets the ones that apply to it.
| Entity | Shows up as | Note |
|---|---|---|
sensor | Sensor (temperature, humidity, air quality…) |
What people report
Govee H50xx/H51xx BLE thermometers are read locally over Bluetooth HCI. The H5074 is finicky and H5178 support is an open PR.
- Works7
- Partly works1
- Requested1
| Device | In Home Assistant | In Apple Home | What they said | Source |
|---|---|---|---|---|
| Govee H5051 | Works Local | Listed in README (BLE only)Saved copySupported devices: Govee H5051 (BLE only); Govee H5072; Govee H5074; Govee H5075; Govee H5101; Govee H5102; Govee H5177; Govee H5179 (BLE only). Excerpt saved from the README on 2026-10-23. | README | |
| Govee H5072 | Works Local | Listed in READMESaved copySupported devices: Govee H5051 (BLE only); Govee H5072; Govee H5074; Govee H5075; Govee H5101; Govee H5102; Govee H5177; Govee H5179 (BLE only). Excerpt saved from the README on 2026-10-23. | README | |
| Govee H5075 | Works Local | Listed in READMESaved copySupported devices: Govee H5051 (BLE only); Govee H5072; Govee H5074; Govee H5075; Govee H5101; Govee H5102; Govee H5177; Govee H5179 (BLE only). Excerpt saved from the README on 2026-10-23. | README | |
| Govee H5101 | Works Local | Listed in READMESaved copySupported devices: Govee H5051 (BLE only); Govee H5072; Govee H5074; Govee H5075; Govee H5101; Govee H5102; Govee H5177; Govee H5179 (BLE only). Excerpt saved from the README on 2026-10-23. | README | |
| Govee H5102 | Works Local | Listed in READMESaved copySupported devices: Govee H5051 (BLE only); Govee H5072; Govee H5074; Govee H5075; Govee H5101; Govee H5102; Govee H5177; Govee H5179 (BLE only). Excerpt saved from the README on 2026-10-23. | README | |
| Govee H5177 | Works Local | Listed in READMESaved copySupported devices: Govee H5051 (BLE only); Govee H5072; Govee H5074; Govee H5075; Govee H5101; Govee H5102; Govee H5177; Govee H5179 (BLE only). Excerpt saved from the README on 2026-10-23. | README | |
| Govee H5179 | Works Local | Listed in README (BLE only)Saved copySupported devices: Govee H5051 (BLE only); Govee H5072; Govee H5074; Govee H5075; Govee H5101; Govee H5102; Govee H5177; Govee H5179 (BLE only). Excerpt saved from the README on 2026-10-23. | README | |
| Govee H5074 | Partly works Local | Listed as supported; finicky, sends four broadcasts and may need a rebootSaved copyThanks for developing this, just what I've been looking for. I'm trying to understand how to access the data from the Govee H5074_4C97 from macOS or on a raspberry pi without the need to go through home assistant. So I'm trying to disentangle what is home assistant and what is extracting the temperature and humidity from this device. If I just run bleson observer on MacOS in a minimal example printing out any advertisement that contains "govee" in the name, I get output like this: Advertisement(flags=0x00, name='Govee_H5074_4C97', txpower=None, uuid16s=[], uuid128s=[], rssi=-64, … Excerpt saved from GitHub on 2026-10-23. | Issue #20 · 2020-09 | |
| Govee H5178 with outdoor module | Requested Local | Multi-sensor support PR still openSaved copyThis adds support for devices with "more than one sensor", like the H5178 which has an outdoor module that reports to the base unit. It also adds specific decoding support for the H5178. The unit acts similarly to H5101/H5102, but has a byte preceding the temperature/humidity payload that seems to differentiate which sensor module the data is for (in this case 00 for the base unit, 01 for the outdoor module). Excerpt saved from GitHub on 2026-10-23. | PR #42 · 2021-05 |
Gathered from GitHub issues, pull requests, discussions and docs, and from r/homeassistant. These are individual reports, so check the linked thread and the date before you buy.
How it connects
Local polling
Talks to the device on your network, asking it for updates every so often.
Details
| Installs (analytics) | 1 |
|---|---|
| GitHub stars | 164 |
| Latest version | v0.10.3 (2023-01-07) |
| Set up in the UI | No, YAML |
| Maintainers | @thrilleratplay |
| License | MIT |
Devices listed in its README
- Govee H5051 (BLE only)
- Govee H5072
- Govee H5074
- Govee H5075
- Govee H5101
- Govee H5102
- Govee H5177
- Govee H5179 (BLE only)
In ReReHome
Whatever HomeKit Bridge shares reaches Apple Home as normal HomeKit accessories behind your Home Assistant bridge, so ReReHome shows and controls them like any other.
Bridges get their own settings page listing the accessories behind them.
