Homee
homee
homee is a smart home system, able to integrate various protocols such as Z-Wave, Zigbee, EnOcean, and more. The homee integration will let you use the devices from your homee in Home Assistant.
In Apple Home through HomeKit Bridge
What HomeKit Bridge makes of each kind of entity this integration creates, read from its source code. A device only gets the ones that apply to it.
| Entity | Shows up as | Note |
|---|---|---|
light | Light | |
switch | Switch or outlet | |
cover | Garage door, blind | |
climate | Thermostat | |
fan | Fan | |
lock | Lock | Needs its own HomeKit Bridge in accessory mode |
alarm_control_panel | Security system | |
binary_sensor | Sensor (carbon monoxide, contact, leak, motion, smoke) | |
sensor | Sensor (carbon monoxide, humidity, light level, temperature) | |
valve | Valve | |
button | Button (as a switch) | |
select | Mode picker (as switches) |
What people report
Homee hubs work with local push; updates are periodic, so moving covers lag. A beta hub firmware briefly broke switching.
- Works4
| Device | In Home Assistant | In Apple Home | What they said | Source |
|---|---|---|---|---|
| Heatit ThermoFloor TF056 thermostat | Works | Added with distinct HVAC and preset handlingSaved copyBreaking change ## Proposed change This adds support for the Heatit ThermoFloor TF056 Thermostat to homee integration. Main change is different handling of HVAC_MODE and PRESET_MODE. These are controlled through the Attribute HEATING_MODE in homee. On other Thermostats, that has po Excerpt saved from GitHub on 2026-10-23. | PR #145515 · 2025-05 | |
| Homee hub beta firmware 2.42.0 | Works | Switching broke on WAITING_FOR_ACKNOWLEDGE state; fixed after reportSaved copyThe problem After the update of the homee firmware 2.42.0 (02c699c3 beta.9) the Interaction between Home Assistent and homee is buggy. Homeassistent can only show the states of the homee devices, but you are not able to switch the devices on or Off. ### What version of Home Assistant Core has the issue? core-2026.6.4 ### What was the last working version of Home Assistant Core? _No response_ ### What type of installation are you running? Home Assistant OS ### Integration causing the issue Home Assistant homee integration ### Link to integration documentation on our website … Excerpt saved from GitHub on 2026-10-23. | Issue #175218 · 2026-06 | |
| Homee-connected locks | Works | Open (unlatch) support addedSaved copyBreaking change ## Proposed change <!-- Describe the big picture of your changes here to communicate to the maintainers why we should accept this pull request. If it fixes a bug or resolves a feature request Excerpt saved from GitHub on 2026-10-23. | PR #168532 · 2026-04 | |
| Lunos ventilation via homee | Works | Account load error fixed in HA 2026.9.0Saved copyThe problem Hello. I have a Lunos ventilation system connected to the Homee app, which is subsequently integrated into Home Assistant. A while ago, the power went out; since it was restored, the Homee account no longer loads in Home Assistant. Everything works normally when I open the Homee app on my phone, and I can see on the modem that the Homee device is connected to the network and has an assigned IP address. As it wasn't working, I removed Homee from Home Assistant and tried to set it up again, but when I attempt to log in using the correct username and password, I get the error shown in … Excerpt saved from GitHub on 2026-10-23. | Issue #188012 · 2026-10 |
Gathered from GitHub issues, pull requests, discussions and docs, and from r/homeassistant. These are individual reports, so check the linked thread and the date before you buy.
How it connects
Local push
Talks to the device on your network, and the device tells Home Assistant the moment something changes.
Found automatically over
- Bonjour (zeroconf)
Details
| Installs (analytics) | 415 (0.06%) |
|---|---|
| Quality scale | Silver |
| Added in | Home Assistant 2025.2 |
| Set up in the UI | Yes |
| Maintainers | @Taraman17 |
Limitations from the docs
- Changed values are reported from homee in defined time intervals and not always in realtime. For example, while a cover moves, the position is updated only every few seconds and intermediate states may be missed by Home Assistant.
In ReReHome
Whatever HomeKit Bridge shares reaches Apple Home as normal HomeKit accessories behind your Home Assistant bridge, so ReReHome shows and controls them like any other.
Bridges get their own settings page listing the accessories behind them.
