Risco
risco
This integration connects with Risco Alarms, in one of two ways:
In Apple Home through HomeKit Bridge
What HomeKit Bridge makes of each kind of entity this integration creates, read from its source code. A device only gets the ones that apply to it.
| Entity | Shows up as | Note |
|---|---|---|
switch | Switch or outlet | |
alarm_control_panel | Security system | |
binary_sensor | Sensor (motion) |
What people report
Local Risco LightSYS panels work via local push; 2024.4 caused partitions to go unavailable for one user and LightSYS Air needed a library bump.
- Works2
- Partly works1
| Device | In Home Assistant | In Apple Home | What they said | Source |
|---|---|---|---|---|
| Risco LightSYS Air (RW432MPV) | Works Local | Supported after pyrisco 0.8.1; 0.8.0 raised KeyErrorSaved copyUpdates the pyrisco dependency from 0.8.0 to 0.8.1. PyRisco 0.8.1 includes support for Risco LightSYS Air (RW432MPV), added in OnFreund/pyrisco#47. With pyrisco 0.8.0, LightSYS Air causes KeyError: 'RW432MPV' because the panel type is not supported. I tested pyrisco 0.8.1 locally with the Risco integration and my LightSYS Air. The integration connects and works correctly with the updated dependency. Related PyRisco PR: https://github.com/OnFreund/pyrisco/pull/47 Changes between PyRisco 0.8.0 and 0.8.1: https://github.com/OnFreund/pyrisco/compare/v0.8.0...v0.8.1 PyRisco 0.8.1 release: … Excerpt saved from GitHub on 2026-10-23. | PR #179818 · 2026-08 | |
| Risco local panel | Works Local | Local push support added; disarm PIN must be the integration's setup codeSaved copyBreaking change ## Proposed change <!-- Describe the big picture of your changes here to communicate to the maintainers why we should accept this pull request. If it fixes a bug or resolves Excerpt saved from GitHub on 2026-10-23. | PR #75874 · 2022-07 | |
| Risco LightSYS 50 panel (firmware 06.07.01) | Partly works Local | Local integration: one of three partitions unavailable after 2024.4.0; panel slow respondingSaved copyI have the same problem with 2024.4.1 2024-04-07 21:16:51.626 DEBUG (MainThread) [homeassistant.components.risco] Risco partition update for 1 2024-04-07 21:16:51.737 DEBUG (MainThread) [homeassistant.components.risco] Risco zone update for 13 2024-04-07 21:16:53.541 DEBUG (MainThread) [homeassistant.components.risco] Risco partition update for 1 2024-04-07 21:16:53.615 DEBUG (MainThread) [homeassistant.components.risco] Risco zone update for 14 2024-04-07 21:16:55.511 DEBUG (MainThread) [homeassistant.components.risco] Risco partition update for 1 2024-04-07 21:16:55.606 DEBUG (MainThread) … Excerpt saved from GitHub on 2026-10-23. | Issue #114830 · 2024-04 |
Gathered from GitHub issues, pull requests, discussions and docs, and from r/homeassistant. These are individual reports, so check the linked thread and the date before you buy.
How it connects
Local push
Talks to the device on your network, and the device tells Home Assistant the moment something changes.
Details
| Installs (analytics) | 661 (0.09%) |
|---|---|
| Added in | Home Assistant 0.115 |
| Set up in the UI | Yes |
| Maintainers | @OnFreund |
In ReReHome
Whatever HomeKit Bridge shares reaches Apple Home as normal HomeKit accessories behind your Home Assistant bridge, so ReReHome shows and controls them like any other.
Bridges get their own settings page listing the accessories behind them.
